Digital Identification Solutions XID 8300 Manual de instrucciones descargar pdf (Pagina 9)

Instruction Manual Page 9

EDIsecure

XID 8300 Ethernet Status Monitor

2.3 List of Status Messages

No.

Displayed Message

Description

No printer is found

The power of the printer is not turned on, or the

host computer is not properly connected to the

printer.

Ready

The printer is in the ready mode. The printer is

ready to start printing cards.

Initializing

The printer is initializing. The printer switches to

the Ready mode after initialization is complete.

Offline Mode

The printer is in the setting mode, or roller

cleaning is in progress. When this is complete,

the printer switches to the Ready mode.

Preheating

Preheating of the heat roller is in progress. The

printer switches to the Ready mode upon

reaching an appropriate temperature.

Card Loading

Card Transporting

MG Encoding

Retransfer

Contact IC Encoding

No-Contact IC Encoding

Printing

The printer is issuing cards. The printer’s

operating status when issuing cards is

displayed. After card issuance is complete, the

printer returns to the Ready mode.

Power Saving

The printer is in the Power Saving mode, which

helps to reduce power consumption. To exit the

Power Saving mode, press the Reset button,

followed by the Enter button to initialize the

printer.

2.4 Displaying Media Status

 Media Status: Displays the media’s remaining space available.

 Card Quantity: Displays the remaining card quantity as three different levels as shown below.

The display may vary according to the thickness as well as bend of the card.

Card Quantity Display

Card Thickness of 0.76 mm

Card Thickness of 0.25 mm

Enough

Approx. 25 cards or more

Approx. 70 cards or more

Less

Less than 25 cards

Less than 70 cards

None

No card

 Ink Quantity: Displays the remaining ink ribbon quantity in 50 different levels in percentage.

 Film Quantity: Displays the remaining retransfer film quantity in 10 different levels in

percentage.

Caution: The remaining quantity shown is an estimated value. Differences may occur according

to the usage as well as media type.

 Ink:

Displays the information on the mounted ink ribbon. The print counter appears blank if the ink ribbon

is not correctly recognized. You may not be able to control the ink ribbon properly in this case. Refer

to the “Setting the ink ribbon” of the “XID 8300 Instruction Manual” (separate booklet) on how to check

its installation.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 31 32

Comentarios a estos manuales

Sin comentarios

Digital Identification Solutions XID 8300 Manual de instrucciones Pagina 9

Comentarios a estos manuales

Relacionado con productos y manuales para Impresión y escaneo Digital Identification Solutions XID 8300